Audac POW2

Opis

The POW2 is an optional power amplifier kit which can be installed inside the R2 and M2 Multi-Zone Digital Audio Matrix housing. In its standard configuration, the R2 and M2 is equipped with 8 line level output channels on which the appropriate amplifiers can be connected, depending on the required power for the specific application.
For certain applications where no large power capacities are required, the optional power amplifier kit can be installed, resulting in a multifunctional matrix and power amplifier merged into one single housing.
The POW2 consists of a 16 Channel (8 Stereo Channel) Class-D amplifier, delivering a power of 60 Watt to every channel at 4 Ohm. In bridge mode an output power of 8 x 120 Watt can be obtained at 8 Ohm. It features an advanced protection circuit which protects against DC malfunctioning, short circuit, overheating and overload while a large heatsink and speed controlled ventilation fan ensure a proper operation temperature is continuously maintained. The POW2 Power amplifier kit includes the power amplifier module, a switching power supply and all necessary connection and installation accessories to properly install the kit inside the R2 or M2’s housing.

SYSTEM SPECIFICATIONS:
RMS Power @ 4 Ohm Stereo: 16 x 60 Watt
RMS Power @ 8 Ohm Stereo: 16 x 30 Watt
RMS Power @ 8 Ohm Bridge: 8 x 120 Watt
Load Impedance: 4 Ohm Stereo, 8 Ohm Bridge
Frequency response: 20 Hz – 20 kHz
Signal to noise ratio: > 100 dB
T.H.D at 1 kHz: Less than 0.1% (1/2 rated power)
Technology: Class-D
Power Supply: Switching mode
Cooling: Temperature controlled fan
Protection: DC short circuit, Overheat, Over load
Operating temperature: 0° ~ 40° C at 95% Humidity

PRODUCT FEATURES:
Weight net: 3.9 kg
Connectors: Input – Internal linked; Output – 4-Pin Euro Terminal Block (5.08 mm / On Matrix Chassis)
Mounting: Integrated in R2 or M2 housing

CIJENA NA UPIT