Dynacord PowerMate 600-3

Opis

Channels (Mono + Stereo): 4 + 4
Microphone Inputs (XLR): 6
Auxiliarys (MON, FX, AUX): 1 Pre, 1 Post, 1 Pre/Post switchable
Max. Single Channel Output Power, Dynamic-Headroom, IHF-A:
into 2.66 Ohms: 2 x 1600 W
into 4 Ohms: 2 x 1250 W
into 8 Ohms: 2 x 675 W
Max. Single Channel Output Power, Continuous, 1 kHz, THD = 1%:
into 2.66 Ohms: 2 x 1350 W
into 4 Ohms: 2 x 1150 W
into 8 Ohms: 2 x 650 W
Maximum Midband Output Power, 1 kHz, THD = 1%, Dual Channel:
into 2.66 Ohms: 2 x 1350 W
into 4 Ohms: 2 x 1000 W
into 8 Ohms: 2 x 600 W
Rated Output Power, 20 Hz to 20 kHz, THD < 0.5%, Single Channel:
into 4 Ohms: 2 x 900 W
into 8 Ohms: 2 x 450 W
Maximum Output Voltage, of power amplifier, 1 kHz, no load: 74 Vrms
THD, at 1 kHz, MBW = 80 kHz
MIC input to Master A L/R outputs, +16 dBu, typical: < 0.005%
POWER AMP INPUTS to Speaker L/R outputs: < 0.075%
DIM 30, power amplifier, 3.15 kHz, 15 kHz: < 0.05%
IMD-SMPTE, power amplifier, 60 Hz, 7 kHz: < 0.15%
Frequency Response, -3 dB, ref. 1 kHz
Any input to any Mixer output: 15 Hz to 70 kHz
Any input to Speaker L/R output: 20 Hz to 30 kHz
Crosstalk, 1 kHz
Amplifier L/R: < -85 dB
Channel to Channel: < -80 dB Mute- and Standby-Switch attenuation: > 100 dB
Fader and FX/AUX/MON-Send attenuation: > 85 dB
CMRR, MIC input, 1 kHz: > 80 dB
Input Sensitivity, all level controls in max. position
MIC: -74 dBu (155 μV)
LINE (Mono): -54 dBu (1.55 mV)
LINE (Stereo): -34 dBu (15.5 mV)
CD (Stereo): -34 dBu (15.5 mV)
POWER AMP INPUTS: +8 dBu (1.95 V)
Maximum Level, mixing desk
MIC inputs: +11 dBu
Mono Line inputs: +31 dBu
Stereo Line inputs: +31 dBu
All other inputs: +22 dBu
All other outputs: +22 dBu
Input Impedances
MIC: 2 kOhms
CD In: 10 kOhms
All other inputs: > 15 kOhms
Output Impedances
Phones: 47 Ohms
All other outputs (balanced/unbalanced): 150 Ohms / 75 Ohms
Equivalent Input Noise, MIC input, A-weighted, 150 ohms: -130 dBu
Noise, Channel inputs to Master A L/R outputs, A-weighted
Master fader down: -100 dBu
Master fader 0 dB, Channel fader down: -92 dBu
Master fader 0 dB, Channel fader 0 dB, Channel gain unity: -82 dBu
Signal/Noise-Ratio, power amplifier, A-weighted, 4 Ohms: 105 dB
Output Stage Topology, amplifier Class D
Equalization
LO Shelving: ±15 dB / 60 Hz
MID Peaking: ±12 dB / 2.4 kHz
HI Shelving: ±15 dB / 12 kHz
Master EQ 9-band
(63, 125, 250, 500, 1k, 2k, 4k, 6.3k, 12k Hz): ±10 dB / Q = 1.5 to 2.5
Filter
LO-CUT, mono inputs: f = 80 Hz, 18 dB/oct., switchable
Speaker Processing: LPN, switchable
Effects
Type: 2 x Stereo 24/48-bit multi effects processors
Effects presets: 100 Factory + 20 User, Tap-Delay
Remote control: Footswitch, MIDI
Display: 128 x 64 pixels, OLED
Digital Audio Interface
Channels: 4 In / 4 Out
AD/DA Conversion: 24-bit
Sampling Rate: 44.1 / 48 / 88.2 / 96 kHz
PC Interface: USB2.0, Female Type B
Peak Display: 6 dB before Clip
MIDI Interface: 5-pin DIN connector, In / Out
Output Power Control (Speaker Protection): Adjustable longterm RMS Limiter
Protection
Mixer Outputs, relay controlled: AUX, MON, MASTER A L/R
Amplifier: Audio Limiters, High Temperature, DC, HF, Short Circuit, Peak Current Limiters, Turn-on Delay, Back EMF
Switching Mode Power Supply (μC controlled): Inrush Current Limiters, Mains Over/Undervoltage, Mains Over Current, High Temperature
Cooling: Continuous speed controlled Fans
Phantom Power, switchable: 48 V DC
Power Requirements (SMPS with auto range mains input): 100 V to 240 V AC, 50 Hz to 60 Hz
Power Consumption, at 1/8 maximum output power, 4 Ohms: 450 W
Safety Class: I
Ambient Temperature Limits: +5 °C to +40 °C
Dimensions (W x H x D), mm With lid:
438.8 x 161.7 x 362.5
Rack-mount:
483 x 135.8 x 310.3 (7 HU)
Weight:
Net Weight, without lid: 9.0 kg
Net Weight, with lid: 9.5 kg
Shipping Weight: 12 kg
Warranty: 36 months
Optional Accessories
Rack Mount Kit: F01U214880 (DC-RMK-600-3)
FS 11 (Footswitch with LED): F01U100598 (DC-FS11)
Carrying bag: F01U259014 (DC-BAG-600PM)