FBT VERTUS CLA 406.2A

FBT VERTUS CLA 406.2A
FBT VERTUS CLA 406.2A
full_Vertus-cla-406.2a-2
full_Vertus-cla-406.2a-3

FBT VERTUS CLA 406.2A – ACTIVE COLUMN LINE ARRAY The active CLA406.2A is a Class-D 600W + 300W system delivering a maximum SPL of 133 dB courtesy of four 6.5” customer woofers and a 1.4” B&C HF compression driver with a 2.5” voice-coil. On-board DSP offers a choice of eight presets while the enclosure’s large-format waveguide delivers 100° (H) x 25° (V) dispersion. The CLA206A, meanwhile, incorporates the same waveguide but with only two 6.5″ woofers. The compact column can be used stand-alone or in clusters, or as an ideal complement for the CLA406.2A, forming an overall system with increased mid-high dispersion and consistent sound pressure uniformity in the listening area.

MPC: Izvorna cijena bila je: 2.413,00 €.Gotovina/Virman 1.840,00 Trenutna cijena je: 1.840,00 €.

Brand:

Dostupno odmah

Opis

Bi-amplified 2-way line array
4 x 165mm (6.5”) custom woofers with 38mm (1.5”) coil
Neodymium B&C compression HF driver with 36mm (1.4”) throat and 64mm (2.5”) coil
Large format FBT waveguide with 100 ° H x 25 ° V dispersion
Frequency response from 65Hz to 20KHz
Class-D 600Wrms for LF and 300Wrms for HF amplifiers with switch mode power supply
DSP processor with 8 equalization presets
Control panel with XLR input and link, volume, presets, filter-HP, ground-lift
Neutrik PowerCON IN and LINK power connectors
Cabinet in 12mm (0.5”) birch plywood with scratch-resistant varnish, two side handles, rubber inserts for protection and upper and lower anti-slip
4 lateral inserts, two upper and two lower points designed to accept quick release pins or M10 screws, two rear M6 suspension points. New hardware for flying installations, for ground setups, and the possibility of coupling two or more CLA 406.2A / CLA 206A with an angle of 0°-20° in 5° steps vertically, all with optional quick release pins for touring.
35mm stand socket
Top side inclined by 10° to have maximum flexibility of use in combination with other CLA 406.2A or CLA 206A in order to adapt the vertical dispersion angle of the system to the listening area.
The system can be used both in point source systems with the CLA 118SA sub and in vertical clusters, with the CLA 206A down-fill.

Specifications:
Built-in amplifier LF/HF: 600/300 W RMS
Built-in amplifier peak LF/HF: 1200/600 W
Frequency response: 65 Hz-20 kHz -6dB
Low frequency woofer: 4×6.5 – 1.5 coil inch
High frequency driver: 1×1.4 – 2.5 coil neodymium inch
Maximum SPL cont/peak: 133 dB
Dispersion: 100° x 25° H x V
Input impedance: 22 kohm
Crossover frequency: 1.2 kHz
Ac power requirements: 640 VA
Input connector: XLR with loop
Power cord: 5 m
Net Dimension (WxHxD): 190x1135x290 mm
Net weight: 27 kg
Transport Dimension (WxHxD): 315x1225x420 mm
Transport weight: 32 kg

Ova web stranica koristi kolačiće kako bi vam osigurala najbolje iskustvo na našoj web stranici.